Before the actual tournament matches can begin tomorrow, we have another setup day today, during which teams can build and test their robots. Traditionally, these setup days are also used for playing friendly matches against other teams, and we have scheduled a friendly match with our long-time friends UBC Thunderbots (Vancouver, Canada) for 2:30 PM.

UBC Thunderbots is a Division B team that has existed for many years and has achieved numerous successes, including first place in Division B at RoboCup 2019 in Sydney, Australia. Our team has always had a close friendship with the Thunderbots, which is why we always try to spend time with them at RoboCup events.

Currently, the robots are still being set up on the field, and preparations are in full swing. Both teams are playing with new robots, ER-Force with 6 and Thunderbots with 5. And finally, it’s time to start. However, it’s not an exciting game: Our robots are suffering from significant firmware and control problems. Additionally, our tachometers are vibrating, resulting in poor measurement data.

All in all, not much happens in the game; our robots mostly stay in our own half of the field, and the game ends in a 0-0 draw. Nevertheless, the game serves its purpose: All the problems that occurred during the game can now be fixed in the hope that tomorrow, when it counts.

There was a small incident at the end: Apparently, one of our chargers was accidentally set to the wrong battery type, resulting in a battery being charged to 4.8V cell voltage, which is very dangerous. The battery was very warm and practically round afterwards. However, together with the league organizers, our team, and the security personnel, we managed to defuse the situation: The battery was put into a LiPo bag, which was placed in a metal cooking pot, and then taken out of the hall onto a free asphalt surface for monitoring from a distance. Finally, the battery was disposed of by firefighters.

All in all, we were fortunate in this case, but such incidents should not happen again. We can conclude that having multiple battery chargers simultaneously is not advantageous, as mistakes can occur more easily. We will likely invest in purchasing additional battery chargers to ensure that we only have one model in the future.

Today is the day: we finally get to enter the hall. Accordingly, we set off early to catch the tram. The destination: Parc des Exposition. As we enter the tram, we are pleasantly surprised to see that RoboCup is actually advertising this year, a novelty! The RoboCup vibe spreads instantly, and everyone hopes that this time there might even be spectators!

But one thing at a time: first, we need to reach our destination and get inside the hall. Due to the political circumstances, we have to undergo a bag check, but apart from that, there are no further incidents, allowing our feet to touch the hallowed ground.

After unloading all our robots and equipment, we also try to pick up the event shirts. However, we quickly realize that it’s not as easy as it seems, as the hoodies and T-shirts can be customized this year. The creativity of our members knows no bounds, and we now have an official traffic light trio.

Freshly equipped with T-shirts and hoodies, we immediately dive into the important tasks: cutting out colored papers for the top of our covers (for the why, see this explanation), finalizing and setting aside the robots.

And just like that, it’s already noon, and it’s time to have lunch with our longtime friends UBC Thunderbots (Vancouver, Kanada). With the beautiful weather, there are plenty of options, as food trucks park outside the hall especially for RoboCup.

After lunch, we continue testing, and in the evening, we even get to test on the real playing field. Here, we notice that our new radio system, sponsored by Gerhard Schubert and HBC Radiomatic, runs smoothly, seamlessly, and without any signal interruptions, much to our delight. Our old radio system was quite unreliable, and we faced massive signal dropouts in almost every game.

However, there seem to be some firmware issues. Sometimes, when the robot changes its frequency (the new radio system is based on frequency hopping), the radio completely fails for the robot. But we are optimistic that we can fix this bug in our firmware.

And so, an action-packed first setup day slowly comes to an end for us. Unfortunately, due to the current political events, the last tram already departs at 6:45 PM, forcing many teams to leave the hall early. Although this does not affect us as our hotel is within walking distance, it is certainly disappointing for the other teams. We sincerely hope that the situation will improve in the coming days and that all teams will have equal opportunities to test their hardware in practice.

We continue our work on the robot on this day as well. Since the early morning hours, our team has been busy assembling the robots, soldering boards, and writing numerous lines of code for our AI. Robots constantly shuttle between the electronics and firmware teams, the sound of the mechanical team’s hand-held Dremel tool resonates throughout the entire floor, as does the continuous playing of “Never Gonna Give You Up” from the firmware room.

To give the team a little break, we have scheduled a journal club at 1:00 p.m., where all of our team members gather to discuss and determine the best publications from other teams. This is one of the tasks we must undertake as a team, as the “Best Paper Award” is awarded based on the votes of all teams. After several more hours of work, we finally transitioned to the relaxing part of the evening: cooking together and unwinding with a bottle of French wine.

It was quite fitting that we cooked pasta – after all, our robot generation is named “Pasta” as well. Thus, dinner was an homage to our metallic midfielder No. 9 – “Fussilli.”

Having been nourished, we are eagerly looking forward to tomorrow when we will finally enter the exhebition hall, and we hope to conduct some tests with our robots on the actual playing field.